Sterling Building Solutions - An Turn-key Solutions, Roof system & Re-roofing solutions, One Point Solution and Terrace roofing shed and parking conopies

Sterling Building Solutions offers turnkey solutions taking responsibilities of not only supplying the sheets but also of installation. The sheeting used is from the best brands in the industry.
The Galvalume® sheeting has a coating of an alloy of Zinc and Aluminum. The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. The coating lasts 2.5 to 3 times longer than the Galvanized steel.
The fasteners, quality of which is mostly ignored, but are a critical component for the life of the roof sheeting are used of the best brands. These self-drilling screws are made of case-hardened Zinc plated steel. The screws come with EPDM rubber metal bonded washer.
Special attention is given to the detailing of the flashings, trims, gutters and down take pipes which contribute in the final performance and the aesthetics of the roof and buildings.
No compromise is made in the quality of sealants, mastic tapes and other sealing compounds used. This ensures leak-proof performance of the roof.
We ensure that the final look of the building is of the highest standards. The resources for this job are carefully handpicked from the industry.

This is traditional roof system wherein the roof sheeting is directly screwed to the structure with the help of a self-drilling screw. Fasteners and flashings are critical components in this type of roof system.
At Sterling Building Solutions we ensure proper detailing is done to take care of minute details of flashings and fasteners.
Other critical components in this system are the sealing materials. At Sterling Building Solutions we use one of the best sealant and sealing components. The sheet profile used is trapezoidal profile corrugated from a coil 550 MPa strength having at least AZ150 coating of Galvalume®

In this type of roof the end laps are eliminated as the length of the sheet is equal to complete one side slope of the building.
For buildings having slope lengths of more than the transportable length, the coil and the roll forming machine are transported to the site and the sheeting is roll formed at the site itself. In this type of roof, the sheet is nowhere pieced with the screws, as a clip forms a connection between the roof and the structure. This clip is fixed to the structure and in turn the sheet is fixed to this clip.

This type of roof system allows the roof to contract and expand due to the thermal stresses induced by the temperature differences.
This is achieved by illuminating the direct contact between the roof and the structure through a special clip fixed to the structure. This sheeting is fixed by a seaming process carried out at the site.